A built-in USB audio interface shares four playback and four recording channels simultaneously with a PC or Mac, following studio standard 24-bit, 96 kHz.
The PowerMate3 10-Channel Powered Mixer from Dynacord features six mic/line and four mic/stereo-line channels. It also has six auxiliary ports, two of them switchable pre/post fader. Two effects processors offer 100 factory presets, including the already legendary PowerMate reverbs. Each preset can be edited and stored to 20 user memories.
A built-in USB audio interface shares four playback and four recording channels simultaneously with a PC or Mac, following studio standard 24-bit, 96 kHz. An additional MIDI interface allows integration of instruments such as keyboards. The 11-band stereo graphic equalizer can be routed to master or monitor channels. The amplifier features 2 x 1000W at 4 Ohms (RMS).
Steinberg Cubase software
Efficient and lightweight with modern switching mode power supply technology and a class‑D output stage
Slim housing protected by a rugged plastic lid with integrated handle for easy transportation
Optional speaker protection allows a limitation of long-term power without giving up dynamics
Made in Germany
In the Box
Dynacord PowerMate3 10-Channel Powered Mixer
Power Cord (6.6′)
DVD with USB Driver & Software
Limited 3-Year WarrantyCg
Channels
6 x Mic/Line
4 x Mic/Stereo Line
Auxiliary
2 x Pre
2 x Post
2 x Pre/Post Switchable
Output Power
Max Single Channel, Dynamic-Headroom, IHF-A:
Into 2.66 Ohms: 2 x 1600 W
Into 4 Ohms: 2 x 1250 W
Into 8 Ohms: 2 x 675 W
Max Single Channel, Continuous, 1 kHz, THD = 1%:
Into 2.66 Ohms: 2 x 1350 W
Into 4 Ohms: 2 x 1150 W
Into 8 Ohms: 2 x 650 W
Max Midband, 1 kHz, THD = 1%, Dual Channel:
Into 2.66 Ohms: 2 x 1350 W
Into 4 Ohms: 2 x 1000 W
Into 8 Ohms: 2 x 600 W
Rated, 20 Hz to 20 kHz, THD < 0.5%, Single Channel:
Into 4 Ohms: 2 x 900 W
Into 8 Ohms: 2 x 450 W
Maximum Output Voltage
Power Amplifier, 1 kHz, No Load: 74 V rms
Maximum THD @ 1kHz
MBW = 80 kHz:
MIC Input to Master A L/R Outputs, +16 dBu, Typical: < 0.005%
Power AMP Inputs to Speaker L/R Outputs: < 0.075%
DIM 30
Power Amplifier, 3.15 kHz, 15 kHz: < 0.05%
IMD SMPTE
Power Amplifier, 60 Hz, 7 kHz: < 0.15%
Frequency Response
-3 dB, ref. 1 kHz:
Any Input to Any Mixer Output: 15 Hz to 70 kHz
Any Input to Speaker L/R Output: 20 Hz to 30 kHz
Crosstalk @ 1 kHz
Amplifier L/R: < -85 dB
Channel to Channel: < -80 dB
Mute- and Standby-Switch Attenuation: > 100 dB
Fader and FX/AUX/MON-Send Attenuation: > 85 dB
CMRR
MIC Input, 1 kHz: > 80 dB
Input Sensitivity
All Level Controls in Max Position:
Microphone: -74 dBu (155 µV)
Line (Mono): -54 dBu (1.55 mV)
Line (Stereo): -34 dBu (15.5 mV)
CD (Stereo): -34 dBu (15.5 mV)
Power AMP Inputs: +8 dBu (1.95 V)
Maximum Level
Mixing Desk:
Microphone Inputs: 21 dBu
Mono Line Inputs: 41 dBu
Stereo Line Inputs: 30 dBu
All Other Inputs: 22 dBu
All Other Outputs: 22 dBu
Input Impedances
Microphone: 2 Kilohms
Insert Return: 3.3 Kilohms
2-Track Return & CD Input: 10 Kilohms
All Other Inputs: > 15 Kilohms
Channels: 4 x Inputs / 4 x Outputs
AD/DA Conversion: 24-Bit
Sampling Rate: 44.1 / 48 / 88.2 / 96 kHz
PC Interface: USB 2.0, Female Type-B
Peak Display: 6 dB Before Clip
MIDI Connectors
1 x 5-Pin DIN, Input / Output
Power Control
Output: Adjustable Longterm RMS Limiter
Protection
Mixer Outputs (Relay Controlled): MON 1, MON 2, MASTER A
Amplifier: Audio Limiters, High Temperature, DC, HF, Short Circuit, Peak Current Limiters, Turn-On Delay, Back EMF
Switching Mode Power Supply (µC controlled): Inrush Current Limiters, Mains Over/Undervoltage, Mains Overcurrent, High Temperature
Cooling
Continuous Speed-Controlled Fans
Phantom Power
Switchable In Groups: 48 VDC
Power Requirements
SMPS with Auto Range Mains Input: 100 to 240 VAC, 50/60 Hz
Power Consumption
At 1/8 Maximum Output Power, 4 Ohms: 450 W
Safety Class
I
Ambient Temperature
40 to 105°F / 5 to 40°C
Dimensions
20.1 x 6.5 x 22.5″ / 510.5 x 164.5 x 571.5 mm (with Lid)
19 x 5.3 x 17.5″ / 483 x 135 x 443.7 mm (Rackmount)
Weight
27.6 lb / 12.5 kg (without Lid)
30.9 lb / 14 kg (with Lid)
Reviews
There are no reviews yet.
Only logged in customers who have purchased this product may leave a review.
A built-in USB audio interface shares four playback and four recording channels simultaneously with a PC or Mac, following studio standard 24-bit, 96 kHz.
2x Mic/Line inputs with separate XLR and TRS jack sockets
2x Stereo inputs with TRS jack sockets
2x Guitar DI high-impedance inputs, eliminating the need for DI boxes
FLEX FX multi-effects processor with 4 slots to load legendary reverb emulations and delays, with 4 dedicated effects buses
24 DCAs to control groups of channels
128-channel (64×64) recording over USB
High-headroom Class A XMAX mic preamplifier (Ch. 9, 11, 13, and 15)
XLR mic inputs (Ch. 9, 11, 13, and 15)
Balanced ¼-inch line inputs (Ch. 9-16)
A built-in USB audio interface shares four playback and four recording channels simultaneously with a PC or Mac, following studio standard 24-bit, 96 kHz۔
Content
Dynacord Power Mixer Overview
The PowerMate3 10-Channel Powered Mixer from Dynacord features six mic/line and four mic/stereo-line channels. It also has six auxiliary ports, two of them switchable pre/post fader. Two effects processors offer 100 factory presets, including the already legendary PowerMate reverbs. Each preset can be edited and stored to 20 user memories.
A built-in USB audio interface shares four playback and four recording channels simultaneously with a PC or Mac, following studio standard 24-bit, 96 kHz. An additional MIDI interface allows integration of instruments such as keyboards. The 11-band stereo graphic equalizer can be routed to master or monitor channels. The amplifier features 2 x 1000W at 4 Ohms (RMS).
Steinberg Cubase software
Efficient and lightweight with modern switching mode power supply technology and a class‑D output stage
Slim housing protected by a rugged plastic lid with integrated handle for easy transportation
Optional speaker protection allows a limitation of long-term power without giving up dynamics
Made in Germany
In the Box
Dynacord PowerMate3 10-Channel Powered Mixer
Power Cord (6.6′)
DVD with USB Driver & Software
Limited 3-Year WarrantyCg
Designed to bring the signature Allen & Heath sensibility to a compact and portable frame, the ZED-6FX is a six-input analog mixer with an internal effects engine that sports reverb, delay, chorusing, and tap-tempo functionality. Solo musicians, lectures, and small bands alike can find this unit suitable for modest venues, hotels, churches, and schools.
The ZED-6FX is crafted with preamps modeled on the Allen & Heath GS2-R24, and, as such, aims to provide low noise, warmth, and a vast expanse of headroom. On-board two-band MusiQ EQs also come standard with the unit, as well as 48V phantom power for the two mic inputs. Guitar players using the ZED-6FX need not lug an extra DI box around, as the unit features two high-impedance guitar inputs. Channels three and four host dual 1/4″ stereo line-level inputs.
You can monitor the outputs of the mixer either through headphones or through two XLR outputs, utilizing an eight-LED meter all the while. If you’d like to hear a sound source before placing it within the audible mix, simply press the PFL button located at the bottom of each channel strip.
Key Features
2x Mic/Line inputs with separate XLR and TRS jack sockets
2x Stereo inputs with TRS jack sockets
2x Guitar DI high-impedance inputs, eliminating the need for DI boxes
Internal FX engine with tap tempo
High-pass filter for cleaning up unwanted low-frequency noise
2-band EQ for tonal shaping
60mm smooth travel fader on main mix
XLR main outputs
8x LED signal metering
48V Phantom Power for condenser mics
Internal power supply
Dynacord Power Mixer Overview
The PowerMate3 16-Channel Powered Mixer from Dynacord features 12 mic/line and four mic/stereo-line channels. It also has six auxiliary ports, two of them switchable pre/post fader. Two effects processors offer 100 factory presets, including the already legendary PowerMate reverbs. Each preset can be edited and stored to 20 user memories.
A built-in USB audio interface shares four playback and four recording channels simultaneously with a PC or Mac, following studio standard 24-bit, 96 kHz. An additional MIDI interface allows integration of instruments such as keyboards. The 11-band stereo graphic equalizer can be routed to master or monitor channels. The amplifier features 2 x 1000W at 4 Ohms (RMS).
Steinberg Cubase software Efficient and lightweight with modern switching mode power supply technology and a class‑D output stage Slim housing protected by a rugged plastic lid with integrated handle for easy transportation Optional speaker protection allows limitation of long-term power without giving up dynamics Made in Germany
In the Box
Power meets efficiency.
Loaded with the processing power, studio-grade audio quality, and flexible routing options that made StudioLive® mixers famous, the StudioLive 32SX is the perfect compact, 32-channel digital mixing solution. Powered by the dual-core PreSonus® FLEX DSP Engine, the StudioLive 32SX digital mixer is equipped with 40 mixing channels, 26 mix buses, and 286 simultaneous processors, including 4 stereo reverberation systems, and Fat Channel plug-in models on every input and mix. The low profile of the StudioLive 32SX makes it an ideal solution for any mixing environment where desk real estate is at a premium. The split-fader workflow lets you manage 32 input channels in two fader layers, while still providing access to your mix outputs on eight additional faders. With 32 XMAX mic preamps and 16 balanced mix outputs, the StudioLive 32SX packs connectivity and power into an efficient use of space.
Features
Powered by the new dual-core PreSonus® FLEX DSP Engine to provide the most processing of any digital mixer in its class
40 input-channel digital mixer with 25 touch-sensitive motorized faders
32 local digitally controlled XMAX mic/line inputs
2 balanced stereo aux inputs
1 stereo tape input (RCA, USB, AVB or SD)
4 FLEX FX returns
1 Talkback
26 mix buses
16 FlexMixes (Aux, Subgroup, Matrix)
4 dedicated FLEX FX buses
4 dedicated subgroups
Stereo Main bus
286 simultaneous processors
HPF
Gate/Expander
Compressor with Fat Channel plug-in models
4-band/6-band parametric EQ with Fat Channel plug-in models
Limiter
31-band graphic EQ
4 FLEX FX slots featuring legendary classic reverb emulations and delays
State Space Modeled Fat Channel compressor and EQ plug-ins available on every input channel and output bus
FLEX FX multi-effects processor with 4 slots to load legendary reverb emulations and delays, with 4 dedicated effects buses
24 DCAs to control groups of channels
128-channel (64×64) recording over USB
Onboard multi-channel SD recorder (34×34) with true Virtual Soundcheck mode
AVB networking onboard (64×64) to connect with other mixers, NSB-series stage boxes, EarMix 16M personal monitor mixers and more
User Profiles for managing multiple operators with custom permissions
Per channel digital patching from any analog, AVB, USB, or SD Card source
DAW Control
Advanced Studio One® control integration
MCU emulation mode optimized for Logic
HUI emulation mode optimized for Pro Tools
Remote control every mix function from your computer, iPad®, or Android™ tablet with UC Surface (included)
Put your musicians’ monitor mix under their fingers with QMix®-UC (included) for iOS® or Android
Capture® 3.0 multitrack software included
Automated Virtual Soundcheck
Store StudioLive® mix scenes with your audio
Advanced Studio One integration (Studio One Artist Included)
XMAX mic preamp control from Studio One
Control Fat Channel parameters from Studio One mixing console
Ableton® Live Lite included
Small size. Bigger possibilities.
In a footprint of less than 2 square feet (0.19 square meters), the compact, 16-channel StudioLive 16.0.2 USB offers 8 mono input channels, 4 stereo channels, and 4 aux buses, each with a high-quality, 60 mm fader. You get generous analog I/O, 12 XMAX Class A solid-state mic preamps, a Talkback input with Class A mic preamp, extensive signal processing with physical controls, MIDI control, accurate metering, and a built-in multichannel recording interface. As with all StudioLive mixers, the 16.0.2 USB comes with a suite of tightly integrated recording, control, and audio analysis software. And it’s so lightweight and compact that you can easily hold it in one hand and tuck it under your arm.
8 mono mic/line channel inputs, each with:
High-headroom Class A XMAX mic preamplifier
XLR mic and balanced ¼-inch line inputs
60 mm precision fader
4 stereo line channel inputs, with:
High-headroom Class A XMAX mic preamplifier (Ch. 9, 11, 13, and 15)
XLR mic inputs (Ch. 9, 11, 13, and 15)
Balanced ¼-inch line inputs (Ch. 9-16)
Unbalanced RCA line inputs (Ch. 13-16)
60 mm precision fader (4 stereo)
4 Auxiliary buses (pre/post-fader send)
2 Internal FX buses
2 stereo 32-bit digital effects processors with customizable reverb and delay presets
Fat Channel signal processing on all channels and buses, with:
3-band semi-parametric EQ (individual band on/off)
Full-featured compressor
Standard downward expander
Limiter
Phase reverse (12 mic preamplifiers only)
Pan with dedicated 15-LED display
Stereo link for input channels and aux buses
Highpass filter
One 31-band stereo graphic EQ (on main outputs only)
18-in/16-out USB recording interface (24-bit/44.1 kHz and 48 kHz)
Compatible with most audio software via ASIO, Windows Audio, Core Audio
Scene store and recall
Settings can be copied among channels and buses and saved as user presets.
Software bundle includes:
PreSonus® Studio One® Artist digital audio workstation for macOS® and Windows ®
PreSonus Capture® live-recording software for macOS and Windows
PreSonus UC Surface mixer-control software for macOS, Windows, Android™, and iPadOS®
Free downloadable PreSonus QMix®-UC software for iPhone®/iPod touch® and Android provides wireless remote control of aux mixes
Ableton® Live Lite
Lockout mode protects your settings from meddlers and accidents
MIDI Control Mode provides control over:
Scene and FX Preset recall
Main Volume, FXA, and FXB output levels
FXA and FXB assign/unassign to Mains
Dynacord Power Mixer Overview
The PowerMate3 22-ChannelPowered Mixer from Dynacord features 18 mic/line and four mic/stereo-line channels. It also has six auxiliary ports, two of them switchable pre/post-fader. Two effects processors offer 100 factory presets, including the already legendary PowerMate reverbs. Each preset can be edited and stored to 20 user memories. Dynacord PowerMate 2200-3 22-Channel Powered Mixer in Pakistan
A built-in USB audio interface shares four playback and four recording channels simultaneously with a PC or Mac, following studio standard 24-bit, 96 kHz. An additional MIDI interface allows the integration of instruments such as keyboards. The 11-band stereo graphic equalizer can be routed to master or monitor channels. The amplifier features 2 x 1000W at 4 Ohms (RMS).
Steinberg Cubase software Efficient and lightweight with modern switching mode power supply technology and a class‑D output stage Optional speaker protection allows limitation of long-term power without giving up dynamics Made in Germany
Reviews
There are no reviews yet.