Inside the StudioLive 16R, the single-core PreSonus® FLEX DSP Engine powers 18 mixing channels, 10 mix buses, and 130 simultaneous processors, including 2 stereo reverberation systems and Fat Channel plug-in models on every input channel and mix bus. This is a true 16-channel digital mixer that can comfortably fit in any size rig. Simply connect it to a standard wireless router and control every mix parameter from your iPad®, Android™ tablet, or Windows® Touch computer, using UC Surface. UC Surface was designed to make mixing on a touch screen as intuitive as mixing on faders but with the benefit of allowing you to mix front-of-house from anywhere in the venue.
Below are the minimum computer-system requirements for StudioLive 16R.
The above are the hardware system requirements for this product.
DAW software and Operating System requirements vary.
Click here for Studio One’s system requirements.
Microphone Preamplifier |
|
|---|---|
| Input Type | Combo locking XLR mic-¼” TRS line |
| Frequency Response to Main Output (at unity gain) | 20-20 kHz, ±0.5 dBu |
| Input Impedance | 1 kΩ |
| THD to Main Output | <0.005%, +4 dBu, 20-20 kHz, unity gain, unwtd |
| S/N Ratio to Main Output (Ref = +4 dB, 20 kHz BW, unity gain, A-wtd) | 94 dB |
| Common Mode Rejection Ratio (1 kHz at unity gain) | 65 dB |
| Gain Control Range (±1 dB) | 0 dB to +60 dB |
| Maximum Input Level (unity gain) | +12 dBu |
| Phantom Power (±2 VDC) | 48 VDC, switchable per channel |
Unbalanced Inputs (Ch. 15-16) |
|
|---|---|
| Type | RCA Female, unbalanced (stereo pair) |
| Maximum Input Level | +12 dBu, ±0.5 dBu |
Main Outputs |
|
|---|---|
| Type | XLR Male, balanced |
| Maximum Output Level | +24 dBu, ±0.5 dBu |
| Output Impedance | 100Ω |
Mix Outputs |
|
|---|---|
| Type | ¼” TRS Female, balanced |
| Maximum Output Level | +18 dBu, ±0.5 dBu |
| Output Impedance | 100Ω |
Headphone Output |
|
|---|---|
| Type | ¼” TRS Female, active stereo |
| Maximum Output | 100 mW/ch. @ 60Ω load |
| Frequency Response | 20 Hz – 20 kHz (± 0.5 dB) |
| THD+N | 0.01%, 1 kHz, max gain, 20 Hz BW, unwtd |
| S/N Ratio | 96 dB, 1 kHz, max gain, 20 Hz BW, unwtd |
System Crosstalk |
|
|---|---|
| Input to Output | -90 dB (Ref = +4 dBu, 20 Hz-20 kHz, unwtd) |
| Adjacent Channels | -87 dB (Ref = +4 dBu, 20 Hz-20 kHz, unwtd) |
Digital Audio and Control |
|
|---|---|
| ADC Dynamic Range | 115 dB (A-wtd, 48 kHz) |
| DAC Dynamic Range | 115 dB (A-wtd, 48 kHz) |
| USB Recording Port | USB 2.0, Type-B |
| Network Control Port | RJ-45 |
| AVB Audio Network Port | Locking XLR Ethernet |
| Internal Processing | 32-bit, floating point |
| Sampling Rate | 48 kHz, 44.1 kHz |
| A/D/A Bit Depth | 24 |
| Reference Level for 0 dBFS | +18 dBu |
| Total System Latency | 1.9 ms (local routing, analog in-analog out, all processing active) |
Clock |
|
|---|---|
| Jitter | <20 ps RMS (20 Hz – 20 kHz) |
| Jitter Attenuation | >60 dB (1 ns in, 1 ps out) |
Power / Environmental |
|
|---|---|
| Connector | IEC |
| Input-Voltage Range | 90 to 230 VAC (±10%) |
| Power Requirements (continuous) | 85W |
| Recommended Ambient Operating Temperature | 0˚ to 40˚ Celsius / 32˚ to 104˚ Fahrenheit |
Physical |
|
|---|---|
| Height | 1.75” (45 mm) |
| Width | 19” (483 mm) |
| Depth | 12” (305 mm) |
| Weight | 8.6 lbs. (3.9 kg) |
Only logged in customers who have purchased this product may leave a review.
| Settings | Presonus StudioLive 16R remove | Dynacord PowerMate 1600-3 16-Channel Powered Mixer remove | Allen & Heath ZED-6FX Compact Analog Mixer (with On-Board Effects Engine) remove | Allen & Heath Qu-32 – 38-In/28-Out Digital Mixing Console remove | Dynacord PowerMate 2200-3 22-Channel Powered Mixer remove | Allen & Heath Qu-Pac 16×12 Compact Mountable Mixer remove |
|---|---|---|---|---|---|---|
| Image | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() |
| SKU | ||||||
| Rating | ||||||
| Price | ||||||
| Stock | In Stock
| In Stock
| In Stock
| In Stock
| In Stock
| In Stock
|
| Availability | In Stock | In Stock | In Stock | In Stock | In Stock | In Stock |
| Add to cart | ||||||
| Description |
|
| A built-in USB audio interface shares four playback and four recording channels simultaneously with a PC or Mac, following studio standard 24-bit, 96 kHz۔ |
| ||
| Content | The best 16-channel digital mixer for your rack.Inside the StudioLive 16R, the single-core PreSonus® FLEX DSP Engine powers 18 mixing channels, 10 mix buses, and 130 simultaneous processors, including 2 stereo reverberation systems and Fat Channel plug-in models on every input channel and mix bus. This is a true 16-channel digital mixer that can comfortably fit in any size rig. Simply connect it to a standard wireless router and control every mix parameter from your iPad®, Android™ tablet, or Windows® Touch computer, using UC Surface. UC Surface was designed to make mixing on a touch screen as intuitive as mixing on faders but with the benefit of allowing you to mix front-of-house from anywhere in the venue.Features
Computer system requirements:Below are the minimum computer-system requirements for StudioLive 16R.macOS®
Windows®
| Dynacord Power Mixer OverviewThe PowerMate3 16-Channel Powered Mixer from Dynacord features 12 mic/line and four mic/stereo-line channels. It also has six auxiliary ports, two of them switchable pre/post fader. Two effects processors offer 100 factory presets, including the already legendary PowerMate reverbs. Each preset can be edited and stored to 20 user memories. A built-in USB audio interface shares four playback and four recording channels simultaneously with a PC or Mac, following studio standard 24-bit, 96 kHz. An additional MIDI interface allows integration of instruments such as keyboards. The 11-band stereo graphic equalizer can be routed to master or monitor channels. The amplifier features 2 x 1000W at 4 Ohms (RMS). Steinberg Cubase software Efficient and lightweight with modern switching mode power supply technology and a class‑D output stage Slim housing protected by a rugged plastic lid with integrated handle for easy transportation Optional speaker protection allows limitation of long-term power without giving up dynamics Made in GermanyIn the Box |
Designed to bring the signature Allen & Heath sensibility to a compact and portable frame, the ZED-6FX is a six-input analog mixer with an internal effects engine that sports reverb, delay, chorusing, and tap-tempo functionality. Solo musicians, lectures, and small bands alike can find this unit suitable for modest venues, hotels, churches, and schools.
The ZED-6FX is crafted with preamps modeled on the Allen & Heath GS2-R24, and, as such, aims to provide low noise, warmth, and a vast expanse of headroom. On-board two-band MusiQ EQs also come standard with the unit, as well as 48V phantom power for the two mic inputs. Guitar players using the ZED-6FX need not lug an extra DI box around, as the unit features two high-impedance guitar inputs. Channels three and four host dual 1/4″ stereo line-level inputs.
You can monitor the outputs of the mixer either through headphones or through two XLR outputs, utilizing an eight-LED meter all the while. If you’d like to hear a sound source before placing it within the audible mix, simply press the PFL button located at the bottom of each channel strip.
Key Features
| THE MIXER THAT CHANGED THE RULES38 in / 28 out Digital Mixer with remote wireless control
Our best-selling digital mixer combines exceptional functionality with innovative design to deliver a professional mixing experience with class-leading sound quality.
Whether you’re making the move from analogue or updating your digital desk, mixing live or in the studio, it’s time to experience Qu.
World Class Processing & FX
Qu’s RackFX dynamics and FX algorithms are derived from those used in our pro touring series.
Some of the world’s most respected audio engineers have chosen to use RackFX on tour in preference to top-end plug-ins and external FX units.
Qu boasts 4 stereo RackFX engines, featuring lovingly crafted emulations of legendary classic reverbs, gated reverbs, delays, modulators, flangers and more. FX are returned to the mix on dedicated return channels, so you’re not tying up your mono and stereo input channels, and each Stereo FX Return has a dedicated 4 band PEQ.
Record. Stream. Mix
Qu-32’s built-in audio interface streams up to 32 selectable tracks to your Mac or PC and returns from the computer can be easily assigned to the Input channels.
The interface is class-compliant on Mac OS X making it truly plug ‘n play and will be recognized straight away by any DAW supporting Core Audio, including Logic, Cubase, Reaper, and Pro Tools. An ASIOTM and WDM compatible driver is available for Windows computers.
Standard MIDI control is tunnelled over the USB and network connections, this can be mapped to the faders of your favourite DAW using the A&H MIDI Control app which provides easy setup and emulation of HUI or Mackie Control protocols on Mac OS X and Windows systems.
Want to livestream? Easy. Just send a stereo mix over USB and your streaming software will do the rest.
| Dynacord Power Mixer OverviewThe PowerMate3 22-Channel Powered Mixer from Dynacord features 18 mic/line and four mic/stereo-line channels. It also has six auxiliary ports, two of them switchable pre/post-fader. Two effects processors offer 100 factory presets, including the already legendary PowerMate reverbs. Each preset can be edited and stored to 20 user memories. Dynacord PowerMate 2200-3 22-Channel Powered Mixer in Pakistan A built-in USB audio interface shares four playback and four recording channels simultaneously with a PC or Mac, following studio standard 24-bit, 96 kHz. An additional MIDI interface allows the integration of instruments such as keyboards. The 11-band stereo graphic equalizer can be routed to master or monitor channels. The amplifier features 2 x 1000W at 4 Ohms (RMS). Steinberg Cubase software Efficient and lightweight with modern switching mode power supply technology and a class‑D output stage Optional speaker protection allows limitation of long-term power without giving up dynamics Made in GermanyIn the Box |
Designed to accommodate a wide variety of live sound reinforcement and recording scenarios, the Allen & Heath Qu-Pac is a 16-input 12-output rackmountable console-less digital mixer that doubles as a 32×32 USB recording interface. Featuring 16 of the company’s recallable AnalogiQ microphone preamps and powered by a 5 core ARM processor, the Qu-Pac provides a variety of integrated effects and processing including channel-independent 4-band parametric EQs, compressors, delay, and reverb.
The mixer is compatible with both the ME Personal Mixing System and dSNAKE digital connectivity system from Allen & Heath, which allows for up to 38 inputs. The Qu-Pac can also be used with the Qu-Pad app, allowing you to use your iPad to mix from anywhere in the venue when connected to a wireless network. Engineered for intuitive navigation, the mixer also features a 5″ touchscreen display, providing access to all settings.
Features at a Glance:
|
| Weight | ||||||
| Dimensions | N/A | N/A | N/A | N/A | N/A | N/A |
| Additional information |
Reviews
There are no reviews yet.